产品中心
PRODUCT CENTER
- 联系人 : 曹镜森先生
- 联系电话 : 0769-82226193
- 传真 : 0769-82226193
- 移动电话 : 15989458768
- 地址 : 中国 广东省东莞市大朗镇仙村仙一区99号
- Email : caojingshen@126.com
- 邮编 : 523792
- 公司网址 : //www.cablespooling.com
- MSN : caoshingcer@126.com
- QQ : 454992321
- 联系人 : 曹镜森
- 联系电话 : 0769-82226193
- 传真 : 0769-82226193
- 公司网址 : //www.cablespooling.com/
塑化厂集中供料系统
塑化厂集中供料系统可以使原料及粉尘对注塑生产的污染减至*底的程度，从而可以保持洁净的生产车间，而塑化厂集中供料系统统独特集中粉尘回收系统，清理更便捷、环保效果更是达到10万级无尘室作业要求标准，并降低噪音，*终可实现无人化的自动化生产车间，树立起现代化工厂管理的形象。
塑化厂集中供料系统安装流程：
1、管道安装时注意注塑机分管对位，不对位影响美观。
2、管道下料段与中央供料杯连接长度约3-4米。
3、管道严禁有漏气现象。
4、钢管在连接时确保管夹正中心对接。
5、集中供料系统走管道，尽量减少弯道。
6、观察厂房墙体结构，判定承受管路重量。
7、管道在条件允许控制高大约3米，方便于安装后续保养。
8、装支架注意天车、天花板、柱子。
9、原料房与系统控制摆放规划。
10、管道排走方式。
11、机台准确摆放位置的尺寸。
塑化厂集中供料系统采用微机集中自动控制，实现了对粒料的24小时连续供料作业。。根据不同成型机的生产量，灵活变更供料量。多台小型微机分别控制各台成型机的着色工艺，计量准确、混合均匀，并可灵活改变颜色，适应对产品的多颜色多品种要求。
Plastic Plant Concentrated Feeding System
The centralized feeding system of the plasticizing plant can reduce the pollution of the raw materials and dust to the bottom of the injection molding process, so that the clean production workshop can be maintained, and the centralized feeding system of the plasticizing plant concentrates the dust collection system, , Environmental protection effect is to reach 100,000 clean room operating requirements standards, and reduce noise, and ultimately can achieve unmanned automated production workshop, and establish a modern factory management image.
Plastic plant centralized feeding system installation process:
1, pipeline installation Note injection molding machine in charge, not the impact of beautiful appearance.
2, the pipeline under the material and the central feeding cup to connect the length of about 3-4 meters.
3, the pipeline is strictly prohibited leak phenomenon.
4, the pipe in the connection to ensure that the center of the tube folder docking.
5, centralized feeding system to take the pipeline, to minimize the corners.
6, observe the plant wall structure, to determine the weight of the pipeline.
7, the pipeline in the conditions allowed to control about 3 meters high, easy to install follow-up maintenance.
8, loaded bracket Note crane, ceiling, pillars.
9, raw materials and system control placed planning.
10, pipe discharge way.
11, the size of the machine accurately placed position.
Plastic plant centralized feeding system using computer centralized automatic control, to achieve the pellet 24 hours continuous feeding operations. The According to the production of different molding machine, the flexibility to change the amount of feed. More than a small computer to control the molding machine of each molding process, accurate measurement, mixed evenly, and flexible to change the color, to adapt to the product of multi-color and more variety requirements
