南京注塑机自动供料系统

南京注塑机自动供料系统
南京注塑自动供料系统采用真空传送方式，通过集中的管路系统将塑料原料从储料罐输送到中央除湿干燥系统，然后将干燥后的原料输送到每台注塑机中。注塑机中央供料系统采用“一台机器一根管”的设计方式，保证整个系统的空气对原料进行输送，防止除湿干燥后的原料回潮。同时在每个输运行稳定，绝无堵料的现象发生。
立式注塑机供料系统配合中央除湿干燥系统使用，可使用除湿干燥送循环后会对输送管线进行清理，确保管路内没有残余的粒料，在避免原料回潮的同时，也保证了加入注塑机中的原料性能的一致。在真空负压作用下原料中原由的粉尘会通过粉尘过滤系统被过滤出来，有助于提高成型产品的质量。
南京注塑机自动供料系统工作原理及组成部分的分析
南京注塑机自动供料系统又叫注塑机中央供料系统。注塑机中央供料系统是为注塑车间的塑料产品生产而设计的，实现了不间断无人化连续成型作业。可根据需要改变原料品种、多颜色材料的组合使用方式，实现着色工序的自动化。系统能够以全自动方式再生和使用注口冷料，能够对所有供料设备的控制，并防止了储料仓内阻塞现象的发生，通过设置中央监控台实现全自动化。
南京注塑机自动供料系统采用微机集中自动控制，实现了对粒料的24小时连续供料作业。多台小型微机分别控制各台成型机的着色工艺，计量准确、混合均匀，并可灵活改变颜色，适应对产品的多颜色多品种要求。根据不同成型机的生产量，灵活变更供料量。多个供料管道设计，可保证对主料多样化的要求。系统具有多种监控及保护功能，工作**可靠。注塑机中央供料系统的别名有：注塑机注塑机中央供料系统、自动送料系统等。 

南京注塑机自动供料系统的组成 
中央控制台、旋风集尘器、高效能过滤器、风机、分支站、干燥料斗、除湿机、选料架、微动料斗、电眼料斗、截风阀、截料阀。
南京注塑机自动供料系统的特点
一、高效：注塑机中央供料系统可实现将多种原料自动供给多室任意的注塑加工设备使用，在这其中可包括原料的干燥处理、配色处理、以及按比例的粉碎回收料利用，能够实行高度的自动化控制、监测等、并能满足24小时不停机的生产需要。
二、节能：南京注塑机自动供料系统操作简易，只需要少数的几个人即可以控制整个注塑工厂的供料需求，从而减少了大量的劳动力成本。其次、减少了在注塑机旁边的原料带及相应的辅助设备、提高了空间的利用率。此外、由于采用了中央供料的方式、相对应地减少了很多的单机设备，也就节省了电能及减少维护费用。

三、个性化：注塑机中央供料系统可以做到不同的使用用户，不同的车间特点，不同的原料使用要求。都可以依实际的需要来设计出**化的方案。

Nanjing injection automatic feeding system
Nanjing injection automatic feeding system using vacuum transmission, through a centralized pipeline system will be plastic raw materials from the storage tank to the central dehumidification drying system, and then dry the raw materials transported to each injection molding machine. Injection molding machine central feeding system using "a machine a tube" design, to ensure that the entire system of air to the raw material for transportation, to prevent dehumidification after drying raw materials resurgence. At the same time in each transport line is stable, no blocking material phenomenon occurred.
Vertical injection molding machine feeding system with the central dehumidification drying system can be used to dehumidify the drying cycle after the transport pipeline to clean up to ensure that there is no residual pellet in the pipeline, to avoid the return of raw materials at the same time, but also to ensure that the injection The performance of the raw materials in the machine is consistent. In the vacuum under the action of raw materials in the original dust will be filtered through the dust filter system, help to improve the quality of molding products.
Analysis on the Working Principle and Components of Automatic Feeding System of Nanjing Injection Molding Machine
Nanjing injection molding machine automatic feeding system, also known as injection molding machine central feeding system. The central feeding system of the injection molding machine is designed for the production of plastic products in the injection molding plant, and has achieved continuous unmanned continuous molding. According to the need to change the variety of raw materials, multi-color materials, the combination of use, to achieve the color process automation. The system is able to regenerate and use the sprinkler in a fully automatic manner, to control all the feeding equipment and to prevent the occurrence of congestion in the storage bin, and to achieve full automation by setting the central control station.
Nanjing injection molding machine automatic feeding system using computer centralized automatic control, to achieve the pellet 24 hours continuous feeding operations. More than a small computer to control the molding machine of each molding process, accurate measurement, mixed evenly, and flexible to change the color, to adapt to the multi-color products and more requirements. According to the production of different molding machine, the flexibility to change the amount of feed. Multiple feed pipe design, can guarantee the requirements of the diversification of the main material. The system has a variety of monitoring and protection functions, safe and reliable work. Injection molding machine central feeding system alias: injection molding machine central injection system, automatic feeding system.
The following are the same as the "
The Composition of Automatic Feeding System for Nanjing Injection Molding Machine
Central console, cyclone dust collector, high efficiency filter, fan, branch station, drying hopper, dehumidifier, election material rack, micro-hopper, electric eye hopper, wind interceptor valve, cut off the valve.
The Characteristics of Automatic Feeding System for Nanjing Injection Molding Machine
First, the efficient: injection molding machine central feeding system can be a variety of raw materials can be automatically supplied to the multi-room arbitrary injection molding processing equipment used, which may include raw materials, drying, color processing, and the proportion of the use of crushed recycled materials, The implementation of a high degree of automation control, monitoring, etc., and to meet the 24-hour non-stop production needs.
Second, energy saving: Nanjing injection molding machine automatic feeding system is simple, only a few people can control the entire injection molding plant demand, thereby reducing the large number of labor costs. Second, the reduction in the injection molding machine next to the raw material and the corresponding auxiliary equipment, improve the utilization of space. In addition, due to the use of the central way of supply, corresponding to reduce a lot of stand-alone equipment, also saves energy and reduce maintenance costs.
Third, the individual: injection molding machine central feeding system can be done using different users, different workshop characteristics, different requirements for the use of raw materials. Can be designed according to the actual needs of the optimal solution.